Accessory: RP1361
RP1361
CBN/PCD/ALP Milling plate dia. 355 mm (14”)
The plate has two slots where tool holders are mounted. One slot is flat and the opposite one is inclined.
Sliding the tool holder mounted on the taper slot when required, its height changes from resting position (In) to working position (Out).
CBN/PCD/ALP Milling plate dia. 355 mm (14”)
The plate has two slots where tool holders are mounted. One slot is flat and the opposite one is inclined.
Sliding the tool holder mounted on the taper slot when required, its height changes from resting position (In) to working position (Out).