HOME  >  PRODUCTS  >  BRAKE/CLUTCH LINE  >  RTV600
RTV600
Flywheel and clucth pressure plate grinder
The RTV600 grinding machine represents the most advanced solution in terms of reconditioning of flywheels, clutch friction plates and pressure plates in industrial vehicles. Thanks to its flexibility, it is also suitable for the fine grinding of any other circular piece like discs, rings or flanges.
The machine offers a high rigidity of torsion, thanks to its updated machining system, to the use of strong material – like the ripped cast iron on the base, on the head, and on the rotary table – and to the hardened and ground steel on the column.
The rotary table has a diameter of 450 mm and its upper surface is dove tailed, in order to easily lock the pieces to be machined. Upon request, it can be supplied with a magnetic plate. The rotary table lies on a ground surface constantly covered with oil, thus reducing friction and wear and preserving the machine at the same time. The cone cup wheel is driven by a 4 kW motor, so as to machine any type of material with high depths of cut. For harder works, the RTV612 model equipped with a 9 kW spindle motor is also available. The standard equipment includes a fast movement of the head, an efficient cooling system with settling tank and a wide range of devices for quick and precise positioning and fixing operations.
Other special fixtures are available on demand, such as the segmented cone wheel, the automatic lathing device or the clamping for pressure plates to meet the requirements of the most demanding mechanics.

Images may show the product equipped with optional accessories
Fill in all fields to request information on this product.
 
 
Standard equipment
  • Head power feed
  • Splash and safety guard
  • Cooling plant complete with pump and settling tank
  • Grinding wheel dresser
  • Wheel dressing diamond
  • Cup grinding wheel for cast iron
  • Set of centering cones
  • Set of supporting rings
  • Dial gauge with support
  • Blocking screws
  • Lubricant for slides
  • Emulsifiable oil
  • Wrench set
  • Instruction manual
Specifications
Maximum grinding diameter
630 mm
Rotary table diameter
450 mm
Max distance table-wheel
220 mm
Taper grinding wheel diameter
150 mm
Grinding wheel speed
2800 rpm
Rotary table speed
5÷30 rpm
Head motor power (RTV612)
4 kW (9 kW)
Table motor power
0,55 kW
Rapid feed head motor power
0,18 kW
Dimensions (LxWxH)
1200x900x1600 mm
Weight
710 Kg
Accessories and spare parts
Comec - RTV581  350 mm Magnetic table
RTV581
ø 350 mm Magnetic table
Comec - RTV580 Pressure plate clamping device
RTV580
Pressure plate clamping device
Comec - RTV591 Small hole flywheel adapter M12/M16
RTV591
Small hole flywheel adapter M12/M16
Comec RTV577 - Motorized cutting assembly
RTV577
Motorized cutting assembly
Comec - RTV574 Corner cutting tool for recessed flywheels
RTV574
Corner cutting tool for recessed flywheels
Comec RTV590 - Pressure plate clamping device
RTV590
Pressure plate clamping device
Comec - RTV594 Conical sector type grinding wheel
RTV594
Conical sector type grinding wheel
Comec - MT0008 Grinding stone for cast iron
MT0008
Grinding stone for cast iron
Comec - MTA008 Grinding stone for steel
MTA008
Grinding stone for steel
Comec - PL0016 Cup grinding wheel for cast iron
PL0016
Cup grinding wheel for cast iron
Comec - PLA016 Cup grinding wheel for steel
PLA016
Cup grinding wheel for steel
Comec - UT0050 Corner cutting tool
UT0050
Corner cutting tool