HOME  >  PRODUCTS  >  ENGINE LINE  >  RP1000
RP1000
Head and block resurfacer
Comec RP1000 Head and block resurfacer
The RP 1000 is a resurfacing machine for cylinder heads and blocks of cars and trucks as well as all flat surfaces which require a high mating surface of finishing and accuracy.
All parts composing the machine as basement, table, column and head are of high quality cast iron widely well-framed which offers high rigidity and sturdiness features.
Table feed operates by a ball screw drive extremely precise even at slow feed speeds; a frequency inverter which controls the ball screw driving motoreducer, offers a variable speed feed widely adjustable by potentiometer.
A further inverter adjusts the spindle speed in order to get the ideal cutting speed all the times according to the different cutting systems as stones for cast iron or aluminium with pre-chambers cylinder head resurfacing, tool for aluminium or CBN-PCD toolholder plate.
A conveniently located digital read-out shows the current rotation speed.
For a convenient and safe use of the machine, all control commands are located on a swing arm control panel adaptable to every operator; moreover, in order to supply a fully equipped product, the standard equipment includes the rapid power feed of the head, an efficient coolant plant complete with tank, and a wheel dressing assembly with diamond dresser.
As option, useful accessories are available like the adjustable set-up  fixture for cylinder heads, V-block mounting kit, rotary table for the grinding of flywheels, clutch pressure plates or brake discs.
 
 
Standard equipment
  • Variable spindle speed complete of digital read-out
  • Variable table travel feed
  • Ball screw drive on table
  • Head power feed
  • Manual/Continuous/Automatic working modes
  • Swing arm control panel
  • Splash and safety guard with policarbonate shield
  • Pair of parallel supports with clamps
  • Oil for slides
  • Wrench set
  • Instruction manual

ONLY GRINDING VERSION:
  • Ø 355mm Grinding wheel complete of segments for cast iron (10 pcs.) and cutting tool
  • Cooling plant complete with pump and settling tank
  • Grinding wheel dresser
  • Emulsifiable liquid

ONLY M VERSION:
  • RP1361 CBN/PCD/ALP Milling plate
  • UT1330 1/2”CBN/PCD insert tool holder
  • UT1355 1/2” CBN Insert for cast iron
Specifications
Table travel
1070 mm
Max workpiece length
895 mm
Max workpiece width
355 mm
Min - Max workpiece height
125÷545 mm
Useful table surface
920x210 mm
Segmented grinding wheel diameter
355 mm (14”)
Variable head speed rotation
300÷1500 rpm
Variable table travel speed
0÷1500 mm/min
Head motor
4.0 kW (M 2.2 kW)
Table motor
0.75 kW
Head rapid feed motor
0.18 kW
Coolant pump motor
0.10 kW
Dimensions (LxWxH)
1680x1140x1850 mm
Weight
1015 kg
Accessories and spare parts
PVA015
Adjustable universal fixture wit parallels
PV0015
Adjustable universal fixturewith mouing plate
PL000A
Motor driven rotary table
RP1361
CBN/PCD/ALP Milling plate dia. 355 mm (14”)
UT0018
Aluminum with Pre-chamber insert tool holder
UT0023
3/8” CBN/PCD insert tool holder
UT0017
Insert tool holder with UT0014
UT0014
Replacement insert for UT0017 (10 pcs)
UT1320
3/8” CBN/PCD insert tool holder
 
UT1355
1/2” CBN Insert for cast iron
UT1356
1/2” PCD Insert for aluminium
UT1390
ALP insert tool holder for UT1392
UT1392
ALP insert for aluminum with prechambers
UT1330
1/2”CBN/PCD insert tool holder
UT1345
1/2” CBN Insert for cast iron
UT1346
1/2” PCD Insert for aluminium