On-the-car disc lathe
The creation of the TD302 lathe stems from the needs for reconditioning brake discs directly on board. It can be used when the removal and mounting operations of the disc are too complicated, like in off-road vehicles, or in the event of brake pedal pulsations, which are due to the more and more widespread phenomenon of wheel wobble. Thanks to a lathe fixing system in place of the brake calliper, the highest machining precision is offered, by keeping the disc and caliper aligned and using the same holes and contact surface. Its reduced weight and dimensions ensure handiness and a practical use.
Moreover, the independent adjusting tools, the automatic feed in both directions, the electric control stop and the complete standard equipment make this machine extremely fast and versatile to use on a wide range of vehicles. The TD332 driving unit eases and speeds up the reconditioning operation.
Browse other Brake disc / drum lathe machines.

Images may show the product equipped with optional accessories
Fill in all fields to request information on this product.
Standard equipment
  • Power feed on both directions (12 V-D.C.)
  • Disc driving unit complete of wheel drive brackets 
  • Electrical control stop
  • Power cable
  • Set of clamps
  • Right-end insert tool holder
  • Left-end insert tool holder
  • Housing case
  • Wrench set
  • Instruction manual
Working stroke
90 mm
Rotor thickness
5÷40 mm
Feed rate
15 mm/min
Feed motor
12 V
8,5 kg
Disc rotation speed
95 rpm
Motor driving unit
0,5 Hp (0,37 kW)
42 kg
Accessories and spare parts
Right hand insert tool holder
Left hand insert tool holder
Replacement insert for UT0028/UT0029 (10 pcs)