HOME   >   ENGINE LINE   >   RP330
Head and block resurfacer
The RP1300 is a resurfacing machine designed for cylinder heads and blocks of cars and trucks but also for all those flat surfaces that require an extremely precised side contact.

This model combines tested solutions, such as  the flat and V-shaped lubricated slides on the base (which guarantee an excellent run fluidity), with other more innovative features, like the table feed through a recirculating-ball screw with a wide range of regulation or an inverter for the spindle speed regulation.  Moreover, RP1300 has an efficient cooling system consisting in a tank on wheels and a grinding wheel dresser. For a convenient and safe use of the machine, all control commands are located on a swing arm control panel adaptable to every operator;

The standard version includes, a segmented grinding wheel for cast iron or aluminium and pre-chamber cylinder head resurfacing and brazed tool for aluminium machining. 
Available as optional a CBN-PCD toolholder plate for the reconditioning at high speed of cast iron and aliminium heads

Consult the brochure or contact us for more information.

Images may show the product equipped with optional accessories
Fill in all fields to request information on this product.
Standard equipment
  • Base cabinet
  • Cooling plant complete of pump and settling tank
  • Segmented grinding wheel complete of grinding segments for cast iron
  • Splash and safety guard
  • Grinding wheel dresser
  • Wheel dressing diamond
  • Head resurfacing tool
  • Pair of parallel supports
  • Locking clamps
  • Wrench set
  • Instruction manual
Table surface
670x270 mm
Maximum distance table to grinding wheel
390 mm
Grinding wheel vertical travel
210 mm
Diameter of grinding
330 mm
Spindle speed Feed speed (on both directions)
1400 rpm
Wheel head motor power
145 mm/min
Feed motor power
2.2 Kw
Coolant pump motor 
0.15 Hp
Dimensions (LxLxH)
1220x1080x1670 mm
445 kg
Accessories and spare parts
Adjustable universal fixture wit parallels
Insert tool holder with UT0014
Replacement insert for UT0017 (10 pcs)
Grinding segments for cast iron
Grinding segments for steel
Grinding segments for aluminium
Variable head spindle speed 700 ÷ 1400 rpm
Variable head feed
Automatic inversion of head feed
Head resurfacing tool
Wheel dressing diamond
Wrench for UT0017
Screw for insert for UT0017